We're an eBay affiliate and may be compensated on purchases made through clicks.

Hendrix opinions

Hey guys,need opinions on this Hendrix cut .the reverse is signed by Mitch.its 3x5,encapsulated by psa.i have an opportunity to purchase it.i want to know what you guys think of the piece in general.it doesn't come cheap .i personally think it's a nice piece.thanks in advance guys.

1 member likes this

Attachments: No photo uploads here

image.jpg, 694 KB

▶ Reply to This

Replies to This Discussion

Permalink Reply by Paul Hakimian on August 7, 2015 at 8:13am

Here is the backside.

Attachments: No photo uploads here

image.jpg, 570 KB

▶ Reply

Permalink Reply by BallroomDays67 on August 7, 2015 at 11:44am

It looks like the dedication was cut off? I'm not sure if that was the best idea considering that it overlapped with the inscription. Also, there appears to be some surface damage that affects the signature. Otherwise, I think it's pretty nice.

▶ Reply

Permalink Reply by Paul Hakimian on August 7, 2015 at 1:10pm

Thanks for your input Mark.i agree, leaving the inscription would have been fine.although I think it looks fine even with the intersecting loop from the inscription.im on the fence with it.i think it is one of the nicer Jimi Hendrix sigs also.just my opinion.

▶ Reply

Permalink Reply by A.B. on August 7, 2015 at 1:25pm

Depends a bit on the price I guess :)

▶ Reply

Permalink Reply by Rich on August 7, 2015 at 1:48pm

I have a question on these PSA encapsulated cuts - is that plastic these signatures are lodged between? if so, is that really a good idea for preservation?

▶ Reply

Permalink Reply by Terry G. on August 11, 2015 at 11:26am

That's something that has long been a subject of debate....on one hand, the two pieces of the slab are "sonically sealed" together, so that prevents possible damage from outside contaminants. It has come to light only recently that the new slabs PSA is using ARE NOT UV light resistant, which shocked many people- part of their early selling points was that they were indeed UV resistant. Depending upon what you are having slabbed, they utilize a "holder" within the slab to keep the object in place, which is acid/PVC free. For some common sized items they have actual correct size slabs that hold the object itself in place(such as some baseball cards). The slab itself is also supposedly PVC free.

I've seen more issues with the validity of PSA grading than issues with the slabs themselves...