Replies to This Discussion

Permalink Reply by Steve Cyrkin, Admin on January 20, 2012 at 4:24pm

Contact Rick Badwey here, of Museum Framing. True archival framing at great rates and he can usually build it so you can put the item in yourself in a few minutes. Just look up his profile here.

• ▶ Reply

Permalink Reply by Thomas Jeffrey on January 21, 2012 at 9:14am

UV filtered  glass, acid free mount/  i think

• ▶ Reply

Permalink Reply by Mike P on January 21, 2012 at 10:38am

what is the autograph on?  A jersey, ball, photograph, etc.?

• ▶ Reply

Permalink Reply by Robin McKay on January 21, 2012 at 10:44am

All my autographs bar a few are photos - at the moment, they are in a box, protected by polypropylene pockets. However some are quite valuable and I want to try and preserve those so what I need to know is when I go into the frame shop, what sort of frame to have made/buy etc. Cheers.

• ▶ Reply

Permalink Reply by Barry S on January 21, 2012 at 11:37am

I think I'm a little different than most people. I have every piece I get professionally framed and on the wall before I start looking again. I'm sure any quality frame shop will help you once you tell them you want your piece protected. Acid free matting, museum quality glass. Even then don't hang where light cat hit it. I think coming up with great ideas on how to have framed is half the fun. And very expensive!

• ▶ Reply

Permalink Reply by Robin McKay on January 26, 2012 at 12:00pm

In the end, after much deliberation, I've decided to put my autos in a box which I bought from Staples and each piece in the box is protected by a polypropylene pocket. Hopefully that will do the trick for now.

Besides nothing is going to retain the original ink forever as everything is susceptible to fading though there are ways of delaying the ink fading.

• ▶ Reply

Permalink Reply by A.B. on March 10, 2012 at 3:22am

Hello everyone

I have a drumhead that seems to be signed with a permanent marker, but the ink is comimg of when you touch it.

So I guess it is not really permanent marker :)

Is this a general problem with drumheads or is it the marker?

Is there anything I can do? E.g. spray something on it to fixture the writing?

 

• ▶ Reply

Permalink Reply by W.W. Dunbar on March 10, 2012 at 11:34am

I purchased a mat cutter a few years ago, and began mounting and framing my own autographs.  The mat cutter was approximately $150.00, and it came with an instructional video on how to measure & cut mat board material.  Picture frames, plexiglass, and hardware can be purchased on-line, to the dimensions you specify, at very reasonable prices.  I can typically double mat & frame a piece for under $35.00, and have always used non-acid materials.  I use photo mounting corners to hang the autographed item to the mat board, so no glues or adhesives will affect the signature.  It's fun, easy to do, and also makes wonderful gifts. 

• ▶ Reply